Schwarzbeck Mess - Elektronik

Switch to: deutsche Version
Homepage    Contact    international representatives    Application Notes    Used Equipment    Search
AntennasAntenna Masts / Tripods / AdaptersCDN 0.15 - 230 MHz, IEC 1000-4-6, EN 61000-4-6
EMI-ReceiversHelmholtz Coils / Radiating LoopsAbsorbing clamps / braid current blocking Clamps
LISN Line Impedance Stabilisation Networks and voltage probesNear field probesPulse Generators
Striplines / TEM-CellsAccessoriesDummy Lamps according to CISPR 15 EN55015
new Products
TypAccessories
Coaxial Cables
AK 951350 Ohm Coax. Cable with N plugs, individual length, usable up to 3 (5) GHz. Indiv. Cal. possible if cable longer than 3 m. Standard lengths: 3 m, 5 m, 10 m.
AK 9515 D50 Ohm Coaxial Cable with N plugs, low loss, limited flexibility, usable up to 10 (18) GHz, 10.5 mm diam. Indiv. Cal. possible if cable longer than 1 m.
AK 9515 E50 Ohm Coaxial Cable with N plugs, low loss, good flexibility, usable up to 10 (18) GHz, 10.8 mm diam. Indiv. Cal. possible if cable longer than 1 m.
AK 9515 G50 Ohm Coaxial Cable available with N- or 7/16-plugs,very low loss, high power, good flexibility, usable up to 6 GHz, 14.6 mm diam. Indiv. Cal. possible if cable longer than 1 m.
AK 9515 H50 Ohm Microwave Coaxial Cable with N- or SMA connectors, low loss, flexible, usable up to 18 GHz. Indiv. Cal. possible if cable longer than 1 m.
MSS 9630Sheath current blocking cable to avoid coupling effects caused by braid currents. Standard configuration: N-male, N-female, length ca. 0.5 m
Fixed Attenuators, pulse limiters
DGA 9552 NBidirectional Attenuator N-female N-male to 18 GHz, 50 Ohm 5 Watt. Available values: 3 dB, 6 dB, 10 dB, 20, 30, 40 dB. [Case optionally available]
VTSD 9561 FDiode Pulse Limiter + 10 dB Attenuation, fuse lamp, N or BNC please tell us your preference!
VTSD 9561 DDiode Pulse Limiter + 20 dB Attenuation, fuse lamp, BNC
VTSD 9562Bandpass and Limiter for Partial Discharge Measurements BNC
Current Clamps and calibration adapters
SW 9602Current Transformer, shielded, 0.01 - 200 MHz, Transfer Impedance: 1 Ohm for wires up to 6.5 mm.
SW 9603Current Transformer, shielded, 9 kHz - 150 MHz, Transfer Impedance: 1 Ohm for wires up to 14 mm.
SW 9605Current Transformer Clamp CISPR 22, 9 kHz - 80 MHz, Transfer Impedance: 1 Ohm for wires up to 23 mm.
SW 9606Current injection clamp for RF current injection into harnesses up to 23 mm diamter, transducer 18 dB.
CA 9607Universal calibration adapter for current clamps, test jig for ferrites, length adjustable.
CA 9608Universal calibration adapter for e.g. the following current clamps: R&S ESV-Z1, Prodyn, IT-050-1, length and height settable.
Baluns
SY 9223-120Balun for transmission measurements acc. to IEC61643-21. 50 Ohm N to 120 Ohm screw terminals.
SY 9223-CISPR 13Broad band isolation transformer acc. CISPR 13 fig. A.2, 50 Ohm 75 Ohm.
SY 9223-PLC1:1 PLC balun acc. to EN 50065-2-1 2003 + A1:2005 für Immunity against small band disturbance voltage. 3 kHz - 30 MHz, BNC and banana jacks.
Opt. 2 µF + 50 OhmOpt. for SY 9223-PLC: 2 µF + 50 Ohm, in isolated housing, banana jacks.
SY 9501Balun unsymm. 50 Ohm to symm. 150 Ohm EN 55015, CISPR 15
[Picture]
SY 9223-17-100Broadband transformer 1:1,4 or 50 Ohm : 100 Ohm respectively acc. to CISPR 17 for filter measurements. 100 Ohm-side with banana jacks. 50 Ohm-side with BNC-jacks.
SY 9223-17-0.1Broadband transformer 22:1 or 50 Ohm : 0.1 Ohm respectively acc. to CISPR 17 for filter measurements. 50 Ohm-side with BNC-jacks, 0.1 Ohm-side with banana jacks.
Other passive devices
BD 9501IEEE-488 Bus-Feed through for flange mounting (shielded rooms) (other feed throughs on request)
HPFHigh Pass Filter 35 - 1000 MHz, Insertion loss at 27.12 MHz typ. 100 dB
TF 130-150Test Fixture for Ford RI 130/ 150 Per EMC-CS-2009
VDHH 9502Van der Hoofden test head with protection network acc. IEC62493 or VDE 0848-493. Program for the calculation of F-factor
CISPR 17 EquipmentTransformers, fixtures and adapters to measure filters, ferrites and other passive components. Detailed product list and data sheets on request.
CCC 9224Capacitive coupling clamp for transients acc. to ISO 7637-3 or DC-10614 B.5.
Preamplifiers
BBV 9743Broadband Coaxial Preamplifier gain max. 30 dB, 10 MHz ? 6 GHz, low noise floor, N-jack N-plug, including power supply.
BBV 9744Broadband Coaxial Preamplifier gain max. 30 dB, 9 kHz – 6 GHz, low noise floor, N-jack N-plug, including power supply.
BBV 9745Broadband Coaxial Preamplifier gain max. 30 dB, 9 kHz –2 GHz, low noise floor, N-jack N-plug, improved ESD protection, including power supply.
BBV 9718Broadband Coaxial Preamplifier typ. 33 dB, 1 - 18 GHz with fixture for 22 mm
BBV 9718 Opt AkkuOption: Rechargeable battery pack for BBV 9718 or 9719.
[Picture]
BBV 9718 Opt. ALCS 2-24ABattery charger ALCS 2-24A for rechargeable battery pack
BBV 9718 Opt. PSOption: Power supply for BBV 9718 or 9719.
BBV 9719Broadband Coaxial Preamplifier typ. 33 dB, 18-26.5 GHz, power supply 12 V 300 mA necessary. Including short cable with SMA plugs to connect the BBV 9719 with the antenna (for example BBHA 9170).
BBV 9719 Opt. PSOption Power supply for BBV 9718 or 9719.
BBV 9719 Opt. BatteryOption Rechargeable battery pack for BBV 9718 or 9719
[Picture]
BBV 9719 Opt. ALCS 2-24ABattery charger ALCS 2-24A for rechargeable battery pack.
BBV 9721Broadband Coaxial Preamplifier typ. 30 dB, 18-40 GHz. Including short cable with 2.92 plugs to connect the BBV 9721 with the antenna (for example BBHA 9170). Noise figure 5.5 dB, P1dBmin=15 dBm, VSWR max in/out = 2,6.
PS 9721Power supply unit for BBV 9721 including cables with secuity plugs, can be used for 110 and 230 V.
Reference radiators, comb generators
SG 9301Spectrum Generator 30-1000 MHz, spectrum lines switchable 100 Hz - 1 MHz, N-female connector, charger ACS 110 required, main application: reference radiator (antenna required e.g. UBAA 9114 with BBVU 9135)
SG 9302Comb generator 0.1 – 18 GHz, spectrum lines every 100 MHz, battery driven, including charger for 230 V.
Field probes
VUFM 1670E-Field Meter 70 kHz-2.5 GHz, 1V/m-300V/m, linear polarized, charger ACS 110 required.
VUFM 1671LCD-Display Unit for VUFM 1670 with 5 m fibre optical link, charger ACS 110 required.
VUFM 1672LCD-Display Unit VUFM 1672 for E - Field-Meter VUFM 1670 with optical link and IEEE 488 / GPIB - Interface.
Other active devices
VHIC 9260Antenna Impedance converter acc. CISPR 25 9 kHz - 30 (120) MHz.
VHIC 9260 Opt. ACS 110Option: Charger ACS 110 for VHIC 9260.
CVP 9222High Impedance Capacitive Voltage Probe acc. to CISPR 22, EN 55022 C 1.3. Frequency range: 9 kHz ? 100 MHz.
CVP 9222 Opt. ACS 110Option: Charger ACS 110 for CVP 9222.
Opt. CAL 9222Option: Calibration Adapter for CVP 9222.