Schwarzbeck Mess - Elektronik

Switch to: deutsche Version
Homepage    Contact    international representatives    Application Notes    Used Equipment    Search
AntennasAntenna Masts / Tripods / AdaptersCDN 0.15 - 230 MHz, IEC 1000-4-6, EN 61000-4-6
EMI-ReceiversHelmholtz Coils / Radiating LoopsAbsorbing clamps / braid current blocking Clamps
LISN Line Impedance Stabilisation Networks and voltage probesNear field probesPulse Generators
Striplines / TEM-CellsAccessoriesDummy Lamps according to CISPR 15 EN55015
new Products
Typ

LISN Line Impedance Stabilisation Networks and voltage probes

NSLK 8127V-LISN, 9 kHz - 30 MHz, 50 µH + 5 Ohm || 50 Ohm, 2 x 16 A Schuko socket, Artificial Hand.
[Picture]
NSLK 8127 Opt. RCOption RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.
NSLK 8127 Opt. PLCOption: Power Line Communication, according to EN 50065-1, selectable ranges: 3 ? 9 kHz, 9 ? 95 kHz, 95 kHz ? 30 MHz.
NSLK 8126V-LISN, 9 kHz - 30 MHz, 50 µH + 5 Ohm || 50 Ohm 4 x 16/25 A, 2 x 16 A Schuko and 4 x 16 A CEKON socket, Artificial Hand.
NSLK 8126 Opt. RCOption RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.
NSLK 8128V-LISN, 9 kHz - 30 MHz, 50 µH + 5 Ohm || 50 Ohm 4 x 32/50 A, 2 x 16 A Schuko and 4 x 32 A CEKON socket, Artificial Hand.
NSLK 8128 Opt. RCOption RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.
CEKONCEKON CEE three- phase current connector plug jack 16 A and 32 A.
SCHUKOAdapter Schuko plug, receptacle for Great Britain, Singapore, Hong Kong, Switzerland, Australia, New Zealand, USA, Canada, Japan, Taiwan...
NNLK 8121V-LISN, 9 kHz - 30 MHz, 50 µH + 5 Ohm || 50 Ohm, 4 x 50 (100) A, wing terminals (For continuously 100 A add the options cont. high current and cooling fans!)
[Picture] [Data]
NNLK 8121 Opt. RCOption RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.
NNLK 8121 Opt. HochstromOption: cont. high current, additional terminals to bypass the 250 µH prefilter-chokes, provides less voltage drop and less heating.
NNLK 8121 Opt.400/700VOption: 400/700 V Voltage to Neutral / Voltage between lines
NNLK 8121 Opt. LüfterOption: Cooling Fans
NNLK 8129V-LISN, (9) 150 kHz - 30 MHz, 50 µH || 50 Ohm, 4 x 200 (300) A, wing terminals, low voltage drop.
[Picture] [Data]
NNLK 8129 Opt. RCOption RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.
NNLK 8129 Opt.400/700VOption: 400/700 V Voltage to Neutral / Voltage between lines
NNLK 8129 Opt.LüfterOption: Cooling Fans
NNLK 8130V-LISN, (9) 150 kHz - 30 MHz, 50 µH || 50 Ohm, 4 x 400 (500) A, wing terminals, low voltage drop, cooling fans.
[Picture] [Data]
NNLK 8130 Opt. RCOption RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.
NNLK 8130 Opt.400/700VOption: 400/700 V Voltage to Neutral / Voltage between lines
NNLK 8140Single Path V-LISN, (9) 150 kHz - 30 MHz, 50 µH || 50 Ohm, 1 x 800 A continuously (1000 A short time), wing terminals, low voltage drop, High power resistors, cooling fans. Max. Voltage: 1000 V DC or 650 V AC 50/60 Hz.
Single path LISN (Automotive) CISPR 25 / ISO 7637
NNBM 8124Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing. Impedance (5µH + 1 Ohm) || 50 Ohm. Max. 70 (100) A. With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path, BNC female connector.
NNBM 8124 Opt. NOption for NNBM 8124: N-female connector instead of BNC.
NNBM 8124-200Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing. Impedance (5µH + 1 Ohm) || 50 Ohm. Max.200 A. With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path, BNC female connector.
NNBM 8124-200 Opt. NOption for NNBM 8124-200: N-female connector instead of BNC.
NNBM 8124-400Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing. Impedance (5µH + 1 Ohm) || 50 Ohm. Max. 400 A. With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path, BNC female connector.
NNBM 8124-400 Opt. NOption for NNBM 8124-400: N-female connector instead of BNC.
NNBM 8126 ALISN 5 µH || 50 Ohm, 70 (100) A, DC 500 V, AC 50 Hz 250 V, AC 400 Hz 110 V.
NNBM 8126 A Opt. DO-160Calibration up to 400 MHz according to DO-160
NNBM 8126 A 890LISN 5 µH || 50 Ohm, 70 (100) single path. Similar to NNBM 8126 A but suitable for 600V DC and 270 V AC 890 Hz. Calibrated up to 400 MHz according to DO-160.
NNBM 8126 DLISN 5 µH || 50 Ohm, 200 A single path.
[Picture]
NNBM 8126 F HYBLISN 5 µH || 50 Ohm, 400 A single path, for hybrid drives.
Two path LISN (Automotive) CISPR 25 / ISO 7637
NNBM 8126 GLISN 5 µH || 50 Ohm, 70 (100) A, two paths, two BNC-connectors
[Picture]
LISN according to MIL 461 MIL 462
NNBL 8225V-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 20 A, 50 Hz AC 250 V, single path, Mil. Std. 461/462
NNBL 8226V-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 70 (100) A, 50 Hz AC 250 V, single path, Mil. Std. 461/462
NNBL 8226-HVV-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 70 (100) A, 50 Hz AC 800 V, single path, Mil. Std. 461/462
NNBL 8226-2V-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 70 (100) A, 50 Hz AC 250 V, two path, Mil. Std. 461/462
[Picture]
NNBL 8230V-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 300 A, 50 Hz AC 250 V, single path, Mil. Std. 461/462.
Special LISN
NDTV 8160Universal Delta-, T-, V-LISN
[Manual]
PVDC 8300PV LISN, 1500 V, 50 A, common mode impedance 150 Ohm, Z differential mode = 100 Ohm, air coils 280 microhenry.
PVDC 8300 Opt. FansOption for PVDC 8300: Fans for a maximum continuous current of 100 A.
PVDC 8301PV-LISN for the DC side of grid connected power converters GCPC, 1500 V, 200 A, common mode impedance = 150 Ohm, differential mode impedance = 100 Ohm, air coils 280 microhenry.
TEMP 8400Tempest LISN 9 kHz to 1 GHz, 2 path model 10 A, N-connectors for DuT power supply and N-connectors for the 2 measurement ports. The unit allows to listen to even the smallest signals on power lines.
TEMP 8401Adapter N-male to wing terminals for TEMP 8400
ISN / T-Networks
NTFM 8131T-ISN 150 Ohm asymmetric, BNC-jack 50 Ohm unsymmetric, 2-wire, 400 V, 3 A AC, 9 kHz ? 30 MHz, CISPR 22 D1/EN55015-2002
NTFM 8158ISN T8 CAT6 (LCL = 75 dB) acc. CISPR 22 edition 5.2, figure D.3. for up to 4 pairs UTP.
CAT5 8158ISN T8 CAT5 (LCL = 65 dB) acc. CISPR 22 edition 5.2, figure D.3. for up to 4 pairs UTP.
CAT3 8158ISN T8 CAT3 (LCL = 55 dB) acc. CISPR 22 edition 5.2, figure D.3. for up to 4 pairs UTP.
ISN S8ISN for screened RJ45 or RJ11 connections, 2, 4 or 8 wire, acc. D.11 CISPR 22 Ed.5.2.
ISN S1ISN acc. CISPR 22 Ed.5.5:2006, Annex D, D9 for coaxial lines
Voltage Probes
TK 9417HF-Probe, 2.5 kOhm
[Picture]
TK 9420High-Voltage-Probe, 1.5 kOhm, 4 pF, 9 kHz - 30 MHz, RF < 30 V
VT 9420Plug-In divider 1.5 kOhm for TK 9420 probe for determination of disturbance source impedance
[Picture]
TK 9421High Power Voltage Probe, 1.5 kOhm, 4 pF, 150 kHz ? 30 MHz RF < 100 V
TK 9422High Power Voltage Probe, 5 kOhm, 4 pF, (9) 150 kHz ? 30 MHz RF < 100 V
Accessories for LISN
KA 812xCalibration adapters for artificial mains networks AMN or LISN
Wiring accessories for LISNWing terminals, hook and ring type cable lugs and connecting accessories for LISN